Maintenance And Maintenance Of Solid Wood Dining Chairs

- Dec 24, 2019-

1: Pay attention to the cleaning and maintenance of the dinette surface. Gently wipe off the surface dust with a soft cotton soft cloth. At intervals, use the wet cotton thread that wrings out the moisture to clean the dust on the corner of the table and chair, and then use a clean dry soft cotton cloth. wipe. Avoid removing stains with alcohol, benzine or other chemical solvents.


2: If the surface of the dining table and chair is stained, do not rub it hard. Use warm tea to remove the stain gently. After the water is evaporated, apply a little light wax to the original part, then gently wipe it several times to form a protective film.


3: Avoid hard scratches. When cleaning, do not touch the cleaning tool to the dinette. Usually, be careful not to let the hard metal products or other sharp objects collide with the dinette to protect the surface from scratches.


4: Avoid wet conditions. In the summer, if the room is flooded, a thin rubber pad should be used to separate the dinette from the ground, and the wall of the dinette should be kept at a distance of 0.5-1 cm from the wall.


5: Keep away from heat. In the winter, it is best to place the dining table and chair at a distance of about 1 meter from the heating flow to avoid long-term baking, causing local cracking of the wood, deformation and deformation, and local deterioration of the paint film.


6: Avoid direct sunlight. Try to avoid the long-term exposure of the outdoor sun to the whole or part of the dinette, so it is best to place it in a place where you can avoid the sun. In this way, it does not affect indoor lighting, but also protects the indoor dining table and chair.